Search

Home > The Amp Hour Electronics Podcast > #493 – PITA Package


	Podcast:		The Amp Hour Electronics Podcast
	Episode:		#493 – PITA Package
	Category:		Science & Medicine
	Duration:		01:03:54
	Publish Date:		2020-05-17 11:13:13
	Description:		There was a large electrical fire where Chris lives in Chicago. Chris is launching a new course for Contextual Electronics making a board with Bluetooth and cellular. This lead to Quectel sending him a development board for the EG91 DB9 is still alive! It was paired with a RS-232 chip on the dev board Chris got Dave is doing a 5 part series about programming the 3 cent micro The first one is about making the programmer Dave wants to call out the “$0.01 linear regulator”, the SSP6206 The cheapest regulator on Digikey is the NCP115, but it has a PITA package to solder (1mm x 1mm!) Carl Bugeja calls out a haptic driver (meant for the buzzer on your cell phone) that can be used as a small motor driver. Chris has been dealing with smaller pitch parts using his new microscope. This model was recommended in a recent Voltlog video about microscopes. XC6206 is another low cost linear regulator. CE forum post about microscope recommendations HEPA fume extractor video Alvaro explains his part setup at home Review of a $100 handheld scope Dave has also done a cheap handheld scope review Flux removers Working with magnet wire Ripping caps off of a board “Are we the baddies?” KiKit panelization tool in KiCad Limor from Adafruit panelizing boards in EAGLE Knocking parts off of a board with a chisel (eWaste Ben) Thanks to Mark Ittleman for the image of the pita on a conveyor
	Total Play:		0