Search

Home > CNC Router Tips Podcast > CNCRT63: CNC For Beginners with Mark Lindsay


	Podcast:		CNC Router Tips Podcast
	Episode:		CNCRT63: CNC For Beginners with Mark Lindsay
	Category:		Technology
	Duration:		01:04:02
	Publish Date:		2019-08-10 05:16:47
	Description:		CNC FOR BEGINNERS WITH MARK LINDSAY CNC Router Tips Podcast Episode 63 CNCRT63: CNC For Beginners With Mark Lindsay I think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away. Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other. Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table. Bill Griggs contact info: Twitter: @BillGriggs Website: http://www.cncroutertips.com SHOW NOTES: http://www.cncroutertips.com/63 WEBSITES MENTIONED Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals. Mark Lindsay CNC https://marklindsaycnc.com Dave Gatton http://www.davegatton.com SmartScreens https://ngeneyes.com/smartscreen/licensing/ SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw Mach3 Software http://www.themakersguide.com/home/products/mach3 The Makers Guide http://themakersguide.com #CNC Router Tips https://www.facebook.com/groups/cncroutertips/ Mach3 Software http://www.themakersguide.com/home/products/mach3 CNC Starter Bit set http://cncroutertips.com/bits VCarve Demo Video http://cncroutertips.com/demo VCarve Software http://themakersguide.com/vcarve8 Triple Edge Finder http://themakersguide.com Maker Masters http://makermasters.com Resources http://cncroutertips.com/resources Youtube http://youtube.com Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible. Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2 Click "View in iTunes" Next Click on ratings and reviews in iTunes Click the "Write a Review" button Leave an honest rating and write a review.
	Total Play:		0