Search


	Podcast:		CNC Router Tips Podcast
	Episode:		CNCRT 09: How To Set Up Your Stepper Motors The Right Way in MACH3.
	Category:		Technology
	Duration:		00:15:26
	Publish Date:		2015-09-08 19:46:52
	Description:		CNC Router Tips Podcast Episode 09: How To Set Up Your Stepper Motors The Right Way in MACH3. Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. I also wondered if the A axis and the Y axis settings have to be exactly the same? Links mentioned http://cncroutertips.com/ http://www.themakersguide.com/home/tutorials http://www.themakersguide.com/home/tutorials/membership-module-1-install-mach3/setting-steps-per-unit http://www.themakersguide.com/home/products/mach3 http://cncroutertips.com/resources http://themakersguide.com How we do it: In Mach3 you need to calibrate the AXIS Steps per Unit. To do this go to the settings tab (page) and look for a button located above the Reset Button which says “Set Steps Per Unit”. Use this button to enter a distance to travel. Measure the actual distance traveled then enter the corrections. Videos: Mach3 Tutorial – Setting Steps Per Unit https://www.youtube.com/watch?v=EVrqObwaAF4 Software: If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/machdemo
	Total Play:		0